Camera Set-up
Nikon Coolpix 990 + Swarovski ST80 HD


Photographer

Dick Newell

Date

April 2001

Location

Paphos, Cyprus

Previous Picture Retired pages

Up To UpAll Groups

Nice Pictures Next Picture


Some pictures by me on this site are taken using a Canon D30 (also D60) with a Canon 100-400 IS lens

Below are some pictures of my digiscoping set-up which comprises:
Nikon Coolpix 990 (with cork and elastic band to overcome faulty battery flap)
[I did temporarily move to a 995, but I experienced difficulty in getting good focus].
Nikon cable release (not shown - an essential, but frustratingly temperamental device) - I have now abandoned this useless device and use a mechanical one instead.
Swarovski ST80 HD with 20-60 zoom eye-piece.
Kaiser slide-viewer (cheap item), with the back hacked off and attached with Velcro
Manfrotto Micropositioning Sliding Plate (to position C of G of whole assembly)
Manfrotto Head
Gitzo Tripod
Home-made hinged bracket made from aluminium and sheet steel.
The bracket attaches to the base of the eye-piece and will only work on those eye-pieces where there is a suitable gap at the base. The thumb-screw inserts into a steel washer that is glued to the back of the camera.

I can assemble the camera to the scope in less than 10 seconds, and when assembled it is very solid. Dis-assembly takes 2 or 3 seconds. Quick orientation of the camera between landscape and portrait format is easy.
There is always full access to the telescope zoom.
The camera lens is as close to the eye-piece lens as it possibly can be, minimizing vignetting on lower zoom shots.



P00306

P00307

Previous Picture Retired pages

Up To UpAll Groups

Nice Pictures Next Picture

Home Home | Search Search

If you wish to comment, feel free to send a mail message by clicking this icon Send email

© 2001 Magik Circle Limited http://www.magikcircle.com